back to list


The very first member of our very own state-of-the-art FUSION SERIES. It’s a triple shielded audio interconnect suitable for both balanced and unbalanced uses.

  • The INTEGRATION HYBRID’s design is based on our worldwide acclaimed D - 102 III HYBRID. 
  • Highly resistant to interference noise: star quad configuration with four stranded FUSION conductors with a very effective triple layered shielding. 
  • Low capacitance presents a low load to the signal source. This means that longer runs of cable can be used without losses. 
  • Hybrid technology means the conductors are embedded in a conductive layer containing our Linear Structured Carbon ®). 
  • Highly versatile. Besides being suitable for both unbalanced and balanced uses, it also serves perfectly as a music instrument or microphone cable. 
  • Fusion Technology conductors are strong and are much less susceptible to break under frequent bending than the average copper cables. 
  • Gold colored jacket in rugged HULLIFLEX ® jacket acts as an excellent protection for heavy use.
material Fusion
product category interconnect - Balanced, Unbalanced, Analogue, Mid-range
product category musical instruments cable
cable type Triple screened quadruple core / star quad (Balanced)
conductor material FUSION TECHNOLOGY: amorphous Cu/Zn/Ag alloy + HYBRID: Linear Structured Carbon ® saturated layer(s)
design purpose Balanced and unbalanced audio interconnect; Microphone and musical instrument cable
eff conductor Cores: 0.16 mm˛ / Cores: ~AWG 25 / Cores: 7; Screen: 180
external diameter 7.8 mm.
jacket colors Gold tone
resistance Cores: 0.43 Ohm/m.; Screen: 0.62 Ohm/100 m.
capacitance 86 pF/m. (in balanced star quad mode)
characteristic impedance ~110 Ohm (in balanced star quad mode); Allows AES-EBU standard digital audio transmission

Cores: PE foam; Jacket: HULLIFLEX ® / 300 Vrms min.

connector types

Our RCA type C - 8.0; Neutrik XLR; Neutrik 1/4" (6.3 mm.) Jack/Phone plug; Custom mountable on ordered lengths.

standard sales units

Stereo pair packed with RCA (unbalanced) or XLR (balanced) connectors in 0.8, 1.0, 1.2 and 1.5 m. lengths.
Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.


Connectors need to be factory mounted.
RCA connector terminated units are equipped with a ground-end marking sticker.


Find a distributor:

back to list