Berri Bus Connector

The Berri bus connector is our improved bus connector with a high quality modular solder style loudspeaker cable termination system universally suited for all our loudspeaker cables and wire types. Most important improvements are:

- No shrinking tube needed

- Spade & Banana head are better fixed  with an extra clamp.

- Improved looks

 
Because a connector must handle current, our design is made for this job.
All parts are heavy 24 carat gold plated so oxidation is almost impossible and the contact quality is maintained over a long period of use.

In short, our versatile Berri Bus Connector provides a reliable and durable high quality connection to your amplifier and loudspeaker binding posts.
For optimal contact care we recommend our The SOLUTION contact fluid.

Berri Busconnector sizes:

• 4.5 mm. Ø: For cables with up to 4.5 mm. jacket diameter.
• 6.5 mm. Ø: For cables with up to 6.5 mm. jacket diameter.
• 8.3 mm. Ø: For cables with up to 8.3 mm. jacket diameter.
• 10.0 mm. Ø: For cables with up to 10.0 mm. jacket diameter.
• 13.2 mm. Ø: For cables with up to 13.2 mm. jacket diameter.
• 20.0 mm. Ø: For cables with up to 20.0 mm. jacket diameter.
  
  There is a list at the bottom of this page where all VDH cables can be found whith the matching Berri bus connectors.

The screw-in terminal:
Fully gold plated; The threaded screw-in terminal is to be screwed into the connector base part.
The large thread surface and tight fit provide a perfect electrical and mechanical contact between both parts.

The screw-in terminal is available in two versions:

• Angled Spade (fork)(*)
  • Gold plated
  • With van den Hul “ VDH ^® ” logo engraving
  • For studs from 5.0 mm. up to 9.0 mm. diameter
  • 15 mm. external blade width
  • 2.0 mm. blade thickness.
  • Excellent mating properties ensure a reliable connection with minimal contact resistance.
    
    
• Banana Tip (*)
  • Gold plated
  • With “van den Hul” brand engraving
  • Standard 4 mm. type
  • With caged spring contact section; Providing a reliable, fully mating connection with minimal contact resistance.
    
    

Our Bus Connector is available:

• A piece in either spade or banana version. In cable entrance diameter (4.5, 6.5, 8.3, 10.0, 13.2 or 20.0 mm.)
  
• As separate parts:
  • Connector base (body) in jacket entrance diameter (4.5, 6.5, 8.3, 10.0, 13.2 or 20.0 mm.)
  • Screw-in terminal (head) in spade or banana version