SCS - 2
The SCS - 2 for certain is the very best PTFE insulated pure metal loudspeaker line available in the world.
The size is 2 gauge with 665 strands and a conductor cross-section area of 33.9 mm².
Ext. diam. is: 9.70 mm.
The resistance is an extremely low 0.51 Ohm/km.
Each strand is made of a very high grade Matched Crystal (MC) OFC covered with a dense and very pure silver coating in an extrusion process.
The SCS - 2 is available on 50 meter reels or in any specified length with beige PTFE jacket with “ van den Hul SCS - 2 ” printing in a brown colour.
The insulation voltage rating is 1000 Volt RMS but the actual test voltage is 3500 Volt RMS.
The tonal quality is superb; especially its extreme and smooth high frequency resolution is exceptional.
The bass reproduction is very natural and powerful.
Shipping weight of 50 meter SCS - 2 is 16.9 kg. without packing.
Special connectors must be used for linking the SCS - 2 to other equipment. We advise the use of our heavy 10.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors in combination with the SCS - 2.
On request we do mount these connectors with some extra charge.
Packing: depending on ordered length.
|
|
|
| Cable Type: | Single wire, multistrand |
| Conductor Material: | High purity dense Silver coated high purity Matched Crystal OFC |
Design Purpose/ Application Area(s): | Loudspeaker cable |
| Eff. Conductor Ø/Eq. AWG No./Strands: | 33.9 mm² / AWG 2 / 665 |
External Diameter / -Dimensions: | 9.70 mm. |
| Resistance 20 °C / 68 °F: | 0.51 Ohm/km. |
| Insulation / Dielectric Strength / Test Voltage: | PTFE / 1000 Vrms / 3500 Vrms |
| Connector Types Suitable: | Our 10.0 mm. Ø cable entrance diameter Bus type Universal Speaker Connectors; Custom mountable on ordered lengths. |
| Standard Sales Units / -Lengths: | 50 m. reels; 1.0, 1.5, 2.0 and 2.5 meter sets (1 set = 4 leads including connectors); Furthermore available in any specified length starting from 1 meter. |
| Jacket Colours Available: | Cream |
| Remarks: | Self mounting of connectors is not advised since special soldering equipment is required; Our custom connector mounting service is available. |